Monthly Archives: February 2017
Building Childrens Furntiture
Having glued and joined all T’s and L’s, the next step is to assemble these joined sections together to complete the basic shape of the piece.
It is best to do this without glue at first, assembling the entire unit with screws alone. Then, when it is together in good order and you are satisfied that nothing is out of line, take it apart, clean and sand all the pieces to prepare them for finishing, and reassemble the unit again, this time permanently with glue.
Though this method imposes some extra time and effort on your part, it makes the sanding operation easier and better, and reassembly goes fast and accurate witheverything fitting back into place like a glove.
Furniture, in order to have good lines and smooth working drawers and doors, must be squared up during assembly before letting the glue-joined sections dry.
In many cases, a large square will serve to check the accuracy of smaller joined sections. On larger cabinets with big rectangular compartments, you can check for squareness by measuring diagonally across the compartment opening from corner to corner. Note this measurement and then measure the opposite crossing diagonal in the same manner. You can also do very nice cheap corner sofa beds.
If the cabinet is square, the two measurements will be the same. If the measurements differ, the piece is not square. To make it square, apply pressure on the corner that has the longer measurement until the cabinet has been forced into a square shape and both diagonal measurements are the same.
You can make weby nice corner sofa bed with storage from fabric or leather.
Having squared the cabinet, it is a good idea to tack the back panel on next before making any doors or drawers, or doing any further work. The back panel will serve to hold the cabinet in shape while adding the rest of the features and, if necessary, it can be removed temporarily whenever it interferes with work to be done.
This machine suit to produce T-shirt bag,garbage bag,flat open bag,patch bag.
1.Plastic bag machine is suitable for high density polyethylene (HDPE), the low density gathers alkene (LDPE) plastic film material.which is produces the plastic film to flat bag,
2. the performance of Plastic bag making machine is stable, the back cover is reliable, is the large, medium and small processed foods enterprise is most economical appropriately, bag sealing&cutting system equipment.
3.plastic bag machine control by computer and PLC,with photo cell,can produce printed and unprinted bag.
1.Computer control over the entire process.
2.From film roll to final bag, one process flow.
3.Servo motor, makes it easy to adjust the bag length and the roduction speed.
4.Automatic film feeding, coordination free from tension adjustment.
5.Automatically stop when film feeding blocks or bags jam.
6.High production efficiency to save manpower and time.
7.Equipment with heat sealing and cold cutting device.
Plastic bag machine Technical Parameter :
Model SHXJ-A600 SHXJ-A700 SHXJ-A800 SHXJ-A900 SHXJ-A1000
width of sealing &cutting 580 mm 680 mm 780 mm 880 mm 980 mm
length of sealing & cutting 700 mm 1200 mm 1200 mm 1400 mm 1600 mm
speed of bag-making (pc/min) 240-400 240-400 60-100 50-100 40-100
Number of strip(pc) 4 4 2 1 1
Power of motor(kw) 1.1 1.5 1.5 2.2 3
Weight(kg) 700 850 900 1000 1100
Outine dimension(m) 3.2*1.2*1.7 3.5*1.3*1.85 3.6 *1.5*1.95 3.7 *1.6 *2 3.8 *1.8*2.1
Kingdom Machine co.,ltd team professional produce plastic bag machine,blown film extrusion,flexo printing machine,stretch film machine,bubble film machine,recycle machine for over 15 years.
Kingdom Machine co,ltd
Ruian Economic Zone,Wenzhou,China 325200